document number 3351 issue 2 IRFM250 2n7225 semelab plc. telephone +44(0)1455 556565. fax +44(0)1455 552612. e-mail: sales@semelab.co.uk website: http://www.semelab.co.uk semelab plc reserves the right to change test conditions, parameter limits and package dimensions without notice. information f urnished by semelab is believed to be both accurate and reliable at the time of going to press. however semelab assumes no responsibility for any errors or omi ssions discovered in its use. semelab encourages customers to verify that datasheets are current before placing orders. v gs gate ? source voltage i d continuous drain current @ v gs = 10v , t c = 25c @ v gs = 10v , t c = 100c i dm pulsed drain current p d max. power dissipation @ t c = 25c linear derating factor i l avalanche current , clamped 1 dv / dt peak diode recovery 2 r jc thermal resistance junction ? case r ja thermal resistance junction ? ambient r cs thermal resistance case ? sink t j , t stg operating junction and storage temperature range t l lead temperature (1.6mm from case for 10s) 20v 27.4a 17a 110a 150w 1.2w / c 27.4a 5.5v / ns 0.83c / w 48c / w 0.21c / w typ. ?55 to 150c 300c mechanical data dimensions in mm (inches) 123 13.59 (0.535) 13.84 (0.545) 3.53 (0.139) 3.78 (0.149) dia. 6.32 (0.249) 6.60 (0.260) 1.02 (0.040) 1.27 (0.050) 30.35 (1.195) 31.40 (1.235) 16.89 (0.665) 17.40 (0.685) 13.59 (0.535) 13.84 (0.545) 20.07 (0.790) 20.32 (0.800) 3.81 (0.150) bsc 0.89 (0.035) 1.14 (0.045) 3.81 (0.150) bsc to?254aa ? isolated metal package pin 1 ? drain pin 2 ? source pin 3 ? gate absolute maximum ratings (t c = 25c unless otherwise stated) 1) v dd = 25v , starting t j = 25c , l 1mh , r g = 25 ? , peak i l = 27.4a 2) i sd 27.4a , di/dt 190a / s , v dd bv dss , t j 150c , suggested r g = 2.35 ? n?channel power mosfet features n?channel mosfet high voltage integral protection diode hermetic isolated to-254 package side tab & tabless package options available screening options available v dss 200v i d(cont) 27.4a r ds(on) 0.100 ? ?
document number 3351 issue 2 IRFM250 2n7225 semelab plc. telephone +44(0)1455 556565. fax +44(0)1455 552612. e-mail: sales@semelab.co.uk website: http://www.semelab.co.uk semelab plc reserves the right to change test conditions, parameter limits and package dimensions without notice. information f urnished by semelab is believed to be both accurate and reliable at the time of going to press. however semelab assumes no responsibility for any errors or omi ssions discovered in its use. semelab encourages customers to verify that datasheets are current before placing orders. parameter test conditions min. typ. max. unit v gs = 0 i d = 1ma reference to 25c i d = 1ma v gs = 10v i d = 17a v gs = 10v i d = 27.4a v ds = v gs i d = 250 a v ds 15v i ds = 17a v gs = 0 v ds = 0.8bv dss t j = 125c v gs = 20v v gs = ?20v v gs = 0 v ds = 25v f = 1mhz v gs = 10v i d = 27.4a v ds = 0.5bv dss v dd = 100v i d = 27.4a vgs = 10v r g = 2.35 ? i s = 27.4a t j = 25c v gs = 0 i f = 27.4a t j = 25c d i / d t 100a/ sv dd 50v electrical characteristics (t j = 25c unless otherwise stated) drain ? source breakdown voltage temperature coefficient of breakdown voltage static drain ? source on?state resistance 2 gate threshold voltage forward transconductance 2 zero gate voltage drain current forward gate ? source leakage reverse gate ? source leakage input capacitance output capacitance reverse transfer capacitance drain ? case capacitance total gate charge gate ? source charge gate ? drain (?miller?) charge turn? on delay time rise time turn?off delay time fall time continuous source current pulse source current 1 diode forward voltage 2 reverse recovery time 2 reverse recovery charge 2 forward turn?on time 200 0.28 0.100 0.105 24 9 25 250 100 ?100 3500 700 110 12 55 115 822 30 60 35 190 170 130 27.4 110 1.9 950 9.0 negligible 8.7 8.7 v v/c ? v s ( ? a na pf nc ns a v ns c nh bv dss ? bv dss ? t j r ds(on) v gs(th) g fs i dss i gss i gss c iss c oss c rss c dc q g q gs q gd t d(on) t r t d(off) t f i s i sm v sd t rr q rr t on l d l s static electrical ratings 1) repetitive rating ? pulse width limited by maximum junction temperature 2) pulse test: pulse width 300 s, ? 2%. dynamic characteristics source ? drain diode characteristics internal drain inductance measured from 6mm down drain lead to centre of die internal source inductance measured from 6mm down source lead to source bond pad package characteristics ( ? )
document number 3351 issue 2 IRFM250 2n7225 semelab plc. telephone +44(0)1455 556565. fax +44(0)1455 552612. e-mail: sales@semelab.co.uk website: http://www.semelab.co.uk semelab plc reserves the right to change test conditions, parameter limits and package dimensions without notice. information f urnished by semelab is believed to be both accurate and reliable at the time of going to press. however semelab assumes no responsibility for any errors or omi ssions discovered in its use. semelab encourages customers to verify that datasheets are current before placing orders. package options 13.46 (0.530) 13.97 (0.550) 13.59 (0.535) 13.84 (0.545) 6.32 (0.249) 6.60 (0.260) 1.02 (0.040) 1.27 (0.050) 1 23 3.81 (0.150) bsc 3.81 (0.150) bsc 0.89 (0.035) 1.14 (0.045) 13.59 (0.535) 13.84 (0.545)
tabless side tab
|
